Ditting Swiss KF1800 Industrial Grinder
The KF1800 is the unique solution for industrial use in small to medium-sized roasting plants,
where space is restricted and enormous grinding capacity is required. Because they take up
little space, several of these grinders can easily be deployed in series, thus offering more than
just a workable alternative to a large industrial-size grinder.
The integrated device (slide cut-off) enables the inflow of beans and the desired output of ground
coffee to be individually regulated. The infinitely adjustable outlet extension tube makes it much
easier to grind into different sized hoppers.
If you are considering a KF1800, you might want to compare it to a special model KFA1403
(with accessories). Your choice will depend on your specific application.
Technical data |
1800 |
Voltage/Frequency/Phases | 220V / 60Hz / 3* |
Motor, horsepower | 6.25 |
Motor current drain, amps | 19 |
Average grinding capacity, lbs/min. | 12-13** |
Hopper capacity, lbs | 66 |
Grinding discs, Ø mm | 180 |
Net weight, lbs | 309 |
Dimensions (WxDxH), inches | 20″x20″x65″ |
* Other electrical specifications are available upon request |
Warranty Information
12 months return to base warranty – Parts Only
Important Notice Regarding Warranty
Any warranty claim is void in any of the following cases;
1. The seal sticker behind the spout is broken or damaged
2. The grinder casing (back cover) has been removed
3. The grinder was obviously manipulated or changed
4. Improper use (other materials than coffee were ground)
Reviews
There are no reviews yet.