The High Efficiency Extraction System is an innovative brewing system that brings out the nuances of any espresso blend, accompanied by a thick, long-lasting crema.

Enables the operator to steam and foam milk automatically.

POWER: This machine requires access to either a 32amp Single Phase or Three Phase – 16amps per phase power supply. This can be hardwired or a bayonet plug can be provided. Please confirm at time of order.

WATER: This machine requires a 15mm cold water feed with isolated stop valve, ¾ inch – BSP screw fittings used (standard for washing machines). 1-5 BAR pressure is needed to run the machine. Very high/ low pressure will need to be addressed prior to install with a pump fitted for low pressure and a regulator fitted for high pressure.

FILTER: This machine will require the use of a BRITA P1200 water filter (provided at time of install). Please make sure there is sufficient room for the filter next to the water supply.

WASTE: This machine requires 1½ inch down pipe, 8 inches minimum connected to a P trap below the machine.

Dimensions (mm) W: 1110 D: 570 H: 630

Weight (kg) Net Gross: 110

Boiler (l) Litres: 17l

Voltage Volt: 415 – three phase 230 – single phase

Power Watt: 5200

Largest Recommended Cup: Weight: 20oz